Category Archives for "Repairs"

Sign

We cut the sign loose, lifted it up, cut off, and then put it back down and welded it up. 

Portable Handrail Repair

We welded and cleaned up the corner of the handrail at the bottom of this spiral staircase. 

Turtle Bay Condominium Pipe Repairs

This condominium complex cut into the wall and the pipe was leaking.  They had to replace it and once they replaced the pipe it had to be welded.  We had to use a mirror to see around the back of the pipe to weld them in that position. 

Shakett Creek Neighborhood Gates

We repaired the entry gates for this neighborhood. 

Cabinetry for Ca’ d’Zan at The Ringling

These cabinets are in the Ca’ d’Zan kitchen at The Ringling. The cabinets were rusted in certain areas that were beyond restoration, but we brought them back. We had to cut away a lot of metal and replace it, put back what we took, and then have them painted. 

Midnight Cove II

The beams were all rotting out from the ground level down. We had to cut into the asphalt, dig down into it, cut away the bad metal and replace it with new metal. 

City Of Bradenton

This project was a stainless steel chute that we designed and fabricated to install at the Bradenton Reclamation Plant. Stainless steel was used so that it does not corrode. The original chute was only installed for about 10 years and they had to replace it. The first picture is of the original chute. The next two pictures […]